Nuclear Fusion · 2003 · 16 citations · 4 references
EngineeringElectrical EngineeringNuclear EngineeringAntennasMicrowave EngineeringPlasma PhysicsAntenna DesignMagnetic Confinement FusionMicrowave AntennasNuclear FusionPlasma ConfinementTokamak EngineeringCeramic Surface CharacteristicsGas Pressure TestingIon Cyclotron WavesNozzlesPulse TestingTokamak PhysicsTokamak PlasmasTokamak Stability
A prototype ion cyclotron range of frequency (ICRF) antenna with RF power of 6 MW has been developed for the long pulse (300 s), high power operation in the Korea superconducting tokamak advanced research (KSTAR) tokamak. Cooling paths in the antenna were carefully designed to remove the dissipated RF power loss. An RF power test has been performed to estimate the standoff capability of the antenna. A high power RF test at a frequency of 30 MHz gives a standoff voltage of 30.5 kVp for 60 s and 23.2 kVp for 300 s (without cooling). During the RF pulse, the peak voltage, forward/reflected powers, temperature of the antenna, and gas pressure are measured. A vacuum feedthrough of 1 MW RF power has been developed, which has two alumina ceramic cylinders and an O-ring seal. For cooling of the ceramic parts, dry air is injected into the ceramic surface through two outer nozzles. Independent cooling water channels are installed to cool the inner conductor of the feedthrough. RF high voltage tests show that stable operation is possible, with a peak voltage of 28.9 kVp for 300 s, without any severe damage.
4
The KSTAR project: An advanced steady state superconducting tokamak experiment
G.S Lee, J Kim, S. M. Hwang et al. · Nuclear Fusion · 2000 · 202 citations
The design of the KSTAR tokamak
G.S. Lee, J Kim, S. M. Hwang et al. · Fusion Engineering and Design · 1999 · 72 citations
Radio Frequency Vacuum Feedthroughs for High-Power ICRF Heating Applications
T.L. Owens, F. W. Baity, D. J. Hoffman et al. · Fusion Technology · 1985 · 11 citations