Radiation effects and defects in solids · 2013 · 14 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologyOptical MaterialsMetal Oxide NanomaterialsNanostructured SurfacesOptical Properties Of SolidsSemiconductor NanomaterialsSurface MorphologySurface PhysicsIon Beam IrradiationNanostructured OxidesNanostructuresOptical Properties Of Metal Oxide NanomaterialsSize-dependent Optical PropertiesSputtering EffectsSurface SputteringTitanium Oxides
The size-dependent optical properties of the nanostructures created on the TiO2(110) surfaces, via low-energy ion-beam sputtering technique, have been investigated here. The crystalline nanostructures have been produced in off-normal geometry. A significant enhancement in UV and visible light absorption has been observed for TiO2 surfaces patterned with nanostructures. Moreover, this enhancement depends on the sizes of the nanostructures. Preferential sputtering of oxygen atoms, during ion beam irradiation, leads to the presence of excess Ti on the surface. Ti-rich zones thus formed can promote nucleation of self-assembled nanostructures on the TiO2(110) surface. These results have been observed in the absence of any dopant. The formation of crystalline TiO2 nanostructures and the development of Ti-rich zones on the surface, after sputtering, are responsible for the enhancement in visible absorbance seen in the present study. Although small-sized (∼10 nm) nanostructures display increased absorbance and a higher bandgap, compared to bulk TiO2, due to quantum effects, much higher absorbance with decreased bandgap is observed from larger-(∼50 nm) sized nanostructures. This enhancement in absorbance is due to the presence of well-developed (200 and 310) crystalline faces in bigger nanostructures.
23