MATERIALS TRANSACTIONS · 2010 · 53 citations · 7 references
EngineeringMaterials EngineeringMechanical EngineeringMechanical Behavior Of MaterialsMetallurgyTribologyFriction Stir WeldingJoint DesignTooling DesignDeformationFriction Stir Spot WeldingFriction Stir Welding ProcessJoint Shear StrengthJoint Strength AnalysisPenetration DepthTool DesignWelded Joints
The joint strength of friction stir spot welded 5J32 Al alloy was investigated according to the tool shape (threaded pin tool: TPT; cylindrical tool: CT; cylindrical tool with projection: CTP) and tool penetration depth. With increasing tool penetration depth, the vertical joint deformation increased in TPT and CT, whereas the joint diameter increased in TPT. The tensile shear load of the joint using TPT and CT did not vary with tool penetration depth, because the decreased upper plate thickness impeded the increase of the tensile shear load. That of CTP, however, rapidly increased with increasing tool penetration depth to produce a maximum tensile shear load of 4.6 kN. CTP, with its shoulder comprising a slight, broad projection, retarded the vertical joint deformation and produced good mechanical properties.
7
Friction stir welding and processing
Choice Reviews Online · 2008 · 3.9K citations
Friction spot joining of an extruded Al–Mg–Si alloy
Sri Lathabai, M.J. Painter, G. M. D. Cantin et al. · Scripta Materialia · 2006 · 133 citations
Engineering, Manufacturing Engineering, Materials Engineering +11