Influence of Cutting Parameters on Cutting Force and Surface Finish in Turning Operation

Abstract

This research reports the significance of influence of speed, feed and depth of cut on cutting force and surface roughness while working with tool made of ceramic with an Al2O3+TiC matrix (KY1615)and the work material of AISI 1050 steel (hardness of 484 HV). Experiments were conducted using Johnford TC35 Industrial type of CNC lathe. Taguchi method (L27 design with 3 levels and 3 factors) was used for the experiments. Analysis of variance with adjusted approach has been adopted. The results have indicated that it is feed rate which has significant influence both on cutting force as well as surface roughness. Depth of cut has a significant influence on cutting force, but has an insignificant influence on surface roughness. The interaction of feed and depth of cut and the interaction of all the three cutting parameters have significant influence on cutting force, whereas, none of the interaction effects are having significant influence on the surface roughness produced. If power consumption minimization is to be achieved for the best possible surface finish, the most recommended combination of feed rate and depth of cut is also determined.