A New Technique to Eliminate Severe Slugging in Pipeline/Riser Systems

Cem Sarica, J. Ø. Tengesdal

SPE Annual Technical Conference and Exhibition · 2000 · 52 citations · 10 references

Concepts

Abstract

Abstract The field developments in deep waters (>6000 ft) are becoming a reality. Severe slugging conditions might occur at considerably high reservoir pressures, and the magnitude of the pressure fluctuations can be significantly high causing premature abandonment and reducing the ultimate recovery of the field. Considering the length of the deep-water risers, the severe slugging is expected to be more severe compared to the production systems installed in lesser depths. Therefore, the design of downstream facilities at the platform becomes very crucial considering the safety of the operation and the limited available space on the platform. A novel technique is proposed to lessen or eliminate severe slugging in pipeline-riser systems applicable to all water depths. The idea is to transfer the pipeline gas (in-situ gas) to the riser at a point above the riser-base. The transfer process will reduce both the hydrostatic head in the riser and the pressure in the pipeline consequently lessening or eliminating the severe slugging. This can be considered as self-gas lifting (i.e., no gas injection is required). An existing severe slugging model based on one-dimensional drift flux formulation, has been modified to simulate the new severe slugging elimination method. The modified model has been verified by comparing it to the existing laboratory severe slugging data from several sources by selecting the transfer point as the riser base.

References

10