SPE Formation Evaluation · 1988 · 151 citations · 2 references
EngineeringPetroleum EngineeringReservoir EngineeringSubsurface Fluid FlowWell TestingWell HydraulicsWell Test AnalysisWell Test DesignWellbore FlowWellbore HydraulicsWellbore Storage EffectsConstant-pressure Boundary AnalysisDual-porosity ReservoirsFlow In Horizontal WellsFluid Distribution Along Horizontal WellsHorizontal Well TestingPressure AnalysisPseudo-radial FlowRadial Flow
The study assumes a homogeneous reservoir that is either infinite or bounded by impermeable or constant‑pressure limits. The paper proposes horizontal‑well test design and interpretation methods, including practical time criteria to delineate flow regimes and guide semilog analysis. Analytical solutions are derived for desktop use that capture early‑time circular radial flow and late‑time horizontal pseudoradial flow in horizontal wells, incorporating pseudoskin, storage, and skin effects, and can be adapted to double‑porosity reservoirs.
Summary This paper presents horizontal-well test design and interpretation methods. Analytical solutions are developed that can be handled easily by a desktop computer to carry out design as well as interpretation with semilog and log-log analysis. These analytical solutions point out the distinctive behavior of horizontal wells: (1) at early time, there is a circular radial flow in a vertical plane perpendicular to the Well, and (2) at late time, there is a horizontal pseudoradial flow. Each type of flow is associated with a semilog straight line to which semilog analysis has to be adapted. The horizontal pseudoradial flow takes into account a pseudoskin depending on system geometry, which is a priori defined and estimated. Practical time criteria are proposed to determine the beginning and the end of each type of flow and to provide a guide to semilog analysis and well test design. We study the behavior of uniform-flux or infinite-conductivity horizontal wells, with wellbore storage and skin. The homogeneous reservoir is infinite or limited by impermeable or constant-pressure boundaries. A method is also outlined to transform all our solutions for homogeneous reservoirs into corresponding solutions for double-porosity reservoirs.
2
Offshore and Onshore European Horizontal Wells
L.H. Reiss, A. P. Jourdan, F. M. Giger et al. · Offshore Technology Conference · 1984 · 24 citations