Offshore and Onshore European Horizontal Wells

L.H. Reiss, A. P. Jourdan, F. M. Giger, P.A. Armessen

Offshore Technology Conference · 1984 · 24 citations · 0 references

Concepts

Abstract

INTRODUCTION Four horizontal wells, one offshore and three onshore, have recently beendrilled in Europe by a French group (Elf Aquitaine and Institut Français duPétrole) using conventional techniques for highly deviated wells. The vertical depth is about 670 m (2,200 ft) for the first well, Lacq 90, onshore France, and reaches 2,800 m (8,400 ft) in the last one, Castera Lou, onshore, Prance. The total amount of the horizontal sections drilled inside the reservoirs(limestones or dolomites) is 1,800 m (5,400 ft) of which 600 m (2,000 ft) forRospo Mare, offshore Italy. Some difficult problems pertaining to highly deviated drilling have beenraised, and at least partially solved, such as weight on the bit, holecleaning, deviation control, excessive dragging, keyseating, cuttings recoverywireline tripping. Almost all available logs have been recorded and 100 m (300 ft) of reservoircored, horizontally. Putting into production a vast off shore oil field, non economically produciblethus began the European horizontal drilling challenge. Today, the majordifficulty seems to be the selective completion of these vast horizontal drainsinside heterogeneous reservoirs. The production results are excellent provided the candidates are carefullyselected, as proved by the 500m3/ d (3,140 bbl/D) of water free oilfrom the best horizontal well. The above mentioned oil field located off Italy in the Adriatic Sea is theRospo Mare field. It is made up of karst, i.e. a very tight limestone rockcomprising dissolution type caverns intersected by fractures. These karsticvoids are the reservoir which is saturated by water in its lower part and by aviscous oil (12° API) in its upper 100 m (300 feet). The oil in place amountsaround 2 billion barrels. Within such a system the vertical wells have topenetrate deeply into the reservoir, dangerously close to WOC, in order to geta reasonably good productivity. This has been the case of the wells drilled onthe Rospo structure; in spite of their good penetration, they all have beentested non economically producible. This led to the concept of drilling long horizontal wells at the very top ofthe reservoir. The aim of this attempt was to move gently upward the WOC withhopefully very smooth deformation. This could be expected from reducedproduction drawdowns thanks to high productivities created by the increasedprobability of intersecting karstic voids and fractures in favorable (upper)structural position. In order to make this idea feasible, an association called "FORROR" wascreated with a scientific body, the Institut Français du Pétrole (IFP) and anindustrial oil company, Elf Aquitane. The budget of the research anddevelopment program financially supported by the European Economic Communitytotaled to $ 10 millions for the period 1979-1983. Its purpose was to masterthe know how in drilling, coring, completing, logging and producing horizontalwells.