Journal of Applied Physics · 2003 · 244 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceOptical MaterialsPhotonicsSurface ScienceInfrared Optical MaterialsInfrared SpectroscopyLaser Surface ProcessingSilicon MaterialsSurface PhysicsUltrafast OpticsCrystalline SiliconFemtosecond Laser PulsesSecondary Ion Mass SpectrometrySiliconSilicon DioxideSilicon MicrostructuresSilicon Optical PropertiesSilicon Surface Science
We show that the near-unity infrared absorptance of conical microstructures fabricated by irradiating a Si(111) surface with 100 fs laser pulses depends on the ambient gas in which the structures are formed. SF6 produces an absorptance of 0.9 for radiation in the 1.2–2.5 μm wavelength range, higher than any of the other gases. Use of Cl2, N2, or air produces surfaces with absorptances intermediate between that for microstructures formed in SF6 and that for flat crystalline silicon, for which the absorptance is roughly 0.05–0.2 for a 260 μm thick sample. Secondary ion mass spectrometry shows that elements from the ambient gas are incorporated into the silicon surface in high concentration.
10
Microstructuring of silicon with femtosecond laser pulses
Tsing-Hua Her, Richard Finlay, Claudia Wu et al. · Applied Physics Letters · 1998 · 807 citations
Near-unity below-band-gap absorption by microstructured silicon
Chengbin Wu, Catherine H. Crouch, Li Zhao et al. · Applied Physics Letters · 2001 · 511 citations
Femtosecond laser-induced formation of spikes on silicon
Tsing-Hua Her, Richard Finlay, Chengkun Wu et al. · Applied Physics A · 2000 · 239 citations