Propylene/Propane Separation with a Gas/Liquid Membrane Contactor Using a Silver Salt Solution

Pavan Chilukuri, Karlijn Rademakers, Kitty Nymeijer, Louis van der Ham, Henk van den Berg

Industrial & Engineering Chemistry Research · 2007 · 37 citations · 10 references

Concepts

Abstract

Traditional systems for olefin/paraffin separation, like low-temperature distillation, are expensive and energy-consuming, and therefore, alternative separation methods are desired. The conceptual design of a new propylene/propane separation process (300 kton/yr at 99.9 wt % propene purity) by means of a gas/liquid membrane contactor and a selective silver salt solution is presented. It involves the selection of an absorption liquid (AgBF 4 ), its concentration (5.5 M, assumed loading of 90%), and the operating conditions of the membrane contactor and the desorber. Subsequently, modeling of the gas/liquid membrane contactor is carried out. The calculated membrane area required for the process is approximately 80 000 m 2 . The influence of the assumptions made during the conceptual design and modeling stage is evaluated with a sensitivity analysis. Finally, a preliminary design is presented, resulting in a process flow sheet with equipment sized on standard design criteria. A brief economic evaluation shows that the marginal difference between the feed and product prices should be at least 175 $/ton to make the proposed propylene/propane separation process economically feasible.

References

10