Journal of The Electrochemical Society · 1956 · 16 citations · 0 references
EngineeringElectrical EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryElectromagnetismCurrent DistributionElectrochemical Cell DesignElectrochemical CellsElectrode MaterialsElectrolysis ProcessesElectrolytic CellsCurrent DensityCurrent-potential RelationshipsElectrode DesignElectrode FabricationElectrode Geometry EffectsElectrodeposition Current DistributionElectroplatingSurface Current Density
By means of the theory of the electropotential, the geometrical shape of a new electro-plating cell was deduced in which the current density along the cathode is linear and can be calculated irectly from the total current and voltage of the cell. The new cell consists of a container with two straight sides intersecting at 45 ~ and two curved sides consisting of rectangular hyperbolic ylinders orthogonal to each other, and each in turn orthogonal to one of the straight sides. One of the straight sides and its opposite curved surface are insulators, the other straight side is the cathode while the remaining curved surface is the anode. The new cell may not only be used for current density studies, but may also be used to determine the total polarization directly from simple measurements onthe cell com-bined with the electrical conductivity of the solution. The use of the Hull cell (1) for making plating tests is well known. I t consists of a small trapezoidal cell in which the two parallel sides are insulators, the third side per-