Improvements in Capacitance-Resistive Modeling and Optimization of Large Scale Reservoirs

Daniel Weber, Thomas F. Edgar, Larry W. Lake, Leon S. Lasdon, Sami Kawas, Morteza Sayarpour

SPE Western Regional Meeting · 2009 · 89 citations · 13 references

Concepts

Abstract

Abstract Oil production strategies traditionally attempt to combine and balance complex geophysical, petrophysical, thermodynamic and economic factors to determine an optimal method to recover hydrocarbons from a given reservoir. Reservoir simulators have traditionally been too large and run times too long to allow for rigorous solution in conjunction with an optimization algorithm. It has also proven very difficult to marry an optimizer with the large set of nonlinear partial differential equations required for accurate reservoir simulation. A simple capacitance-resistive model that characterizes the connectivity between injection and production wells can determine an injection scheme that maximizes the value of the reservoir asset. Model parameters are identified using linear and nonlinear regression. The model is then used together with a nonlinear optimization algorithm to compute a set of future injection rates which maximize discounted net profit. Research previously conducted has shown that this simple dynamic model provides an excellent match to historic data. Based on a number of simulated and two actual fields, the optimal injection schemes based on the capacitance-resistive model yield a predicted increase in hydrocarbon recovery of up to 60% over the extrapolated historic decline. An advantage of using a simple model is its ability to describe large scale systems in a straightforward way with computation times that are short to moderate. However, applying the capacitance-resistive model to large reservoirs with many wells presents several new challenges. Reservoirs with hundreds of wells have longer production histories that often represent a variety of different reservoir conditions. New wells are created, wells are shut in for varying periods of time and production wells are converted to injection wells. Additionally, history matching large reservoirs by nonlinear regression is more likely to produce parameters that are statistically insignificant, resulting in a parameter dense model that does not accurately reflect the physical properties of the reservoir. Several modeling techniques and heuristics are presented that provide a simple, accurate reservoir model that can be used to optimize the value of the reservoir over future time periods.

References

13