Applied Physics Letters · 2015 · 58 citations · 19 references
EngineeringMechanical EngineeringFluid DynamicsHeat TransferMicrofabricationBoiling Heat TransferBubble DynamicsHeat Transfer In FluidsMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsBoilingBubble FormationCritical Heat FluxFlow BoilingMicrochannel FlowMicrochannel Heat TransferPressure DropPressure Recovery
In this paper, we demonstrate using liquid inertia force in a taper gap microchannel geometry to provide a high level of heat dissipation capacity accompanied by a high heat transfer coefficient and low pressure drop during flow boiling. The high mass flux increases liquid inertia force and promotes vapor removal from the manifold, thereby increasing critical heat flux (CHF) and heat transfer coefficient. The tapered gap above the microchannels provides an increasing cross-sectional area in the flow direction. This gap allows bubbles to emerge from microchannels and expand within the gap along the flow direction. The bubble evaporation and expansion in tapered gap causes pressure recovery and reduces the total pressure drop. The pressure recovery increases with the increased evaporation rate at higher heat fluxes. Using a 6% taper and a moderately high inlet liquid flow Reynolds number of 1095, we have reached a CHF of 1.07 kW/cm2 with a heat transfer coefficient of 295 kW/m2 °C and a pressure drop of 30 kPa.
19
Heat Transfer in Microchannels—2012 Status and Research Needs
Satish G. Kandlikar, Stéphane Colin, Yoav Peles et al. · Journal of Heat Transfer · 2013 · 284 citations