On computation of strain‐dependent permeability of rocks and rock‐like porous media

Abstract

Summary Determination of transport properties of geomaterials is an important issue in many fields of engineering analysis and design. For example, in petroleum engineering, in situ permeability of an oil reservoir may be crucial in establishing its viability for exploitation, whilst prevention of leakage from underground storage facilities for oil and gas, nuclear waste as well as viability of CO 2 sequestration projects crucially depends on its long‐term values. Permeability is indirectly related to the porosity, pore‐size distribution and pore architecture of the porous media. These parameters evolve when a strain field is imposed. Physical measurement of permeability under a strain field in laboratory conditions is difficult, expensive and prone to a number of uncertainties. In the past, pore network models have been used to compute permeability of materials under stress/strain‐free conditions. In this paper, we propose an enhanced pore network model to compute permeability of rocks and rock‐like porous media under a stress/strain field. Data of pore‐size distribution obtained from mercury intrusion porosimetry are used to compute permeability of rock samples from various unspecified oilfields in the world. It is shown that the two permeabilities can be predicted from the model with sufficient accuracy. A hypothesis for change in porosity, pore‐size distribution and pore architecture as a result of imposed mechanical strains is then proposed. Based on this, permeability is computed again for one of the rock samples under uniaxial and triaxial compressive and tensile strain fields. It is shown that depending on the state of strain field imposed, permeability evolves in an anisotropic manner. Permeability under tensile strain field increases dramatically compared with the reduction that takes place under compressive strain field of the same magnitude. Copyright © 2014 John Wiley & Sons, Ltd.