PSInSAR Validation by Means of a Blind Experiment Using Dihedral Reflectors

G. Savio, A. Ferretti, F. Novali, S. Musazzi, C. Prati, F. Rocca

2006 · 19 citations · 3 references

Concepts

Abstract

As well known, the Permanent Scatterers (PS) Technique [1] is an advanced tool for processing series of interferometric SAR data aiming at ground deformation mapping with millimetric precision. Even though the potential of this approach has been already proved in several applications, ranging from urban subsidence monitoring to landslide detection in Alpine region, it is in general very difficult to obtain a comprehensive validation of the estimated measurements. The problem, in many cases, stems from the lack of ground truth or to the availability of measurements that are difficult to compare with those obtained from InSAR, due to the different temporal coverage and/or acquisition geometry. In order to perform a comprehensive validation of the InSAR approach and to assess the limits of its applicability, a blind experiment has been carried out by Politecnico di Milano and TRE in cooperation with the Centro Elettrotecnico Sperimentale Italiano (CESI), in the framework of a research activity financed by the public fund for the Italian Electric System. Two couples of dihedral reflectors have been deployed and pointed so that the reflectors were visible along ascending orbits of both Envisat and Radarsat platforms. The aim of the experiment was to move one couple of dihedral reflectors of a few millimetres from one acquisition to another, along both vertical and East-West direction, and to compare these displacements with those estimated by means of interferometric measurements applied to ascending and descending data. In this paper, the results of the experiment carried out using a series of 25 Radarsat and 8 Envisat acquisitions (considering both ascending and descending data) are reported for the first time. Data allow the comparison of the estimated time series with the imposed motion: a standard deviation of just 1 mm has been measured for both horizontal and vertical components.

References

3