AIP conference proceedings · 1975 · 123 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMagnetic MaterialsMechanical Behavior Of MaterialsMetallic MaterialsAlloysAmorphous Magnetic MaterialsAmorphous MaterialsAmorphous SolidsMagnetic Properties Of SolidsMetalsAmorphous AlloysAmorphous Magnetic AlloysAmorphous MetalsHysteresisHysteresis BehaviorHysteresis LoopsMagnetic PropertiesMetglas
Amorphous metallic alloys are reviewed for their structure, mechanical, and especially low‑field magnetic properties. The paper discusses potential applications of these alloys. The study examines Metglas ribbons (≈1.5 mm × 35 µm) produced by Allied Chemical Corp. The alloys exhibit low coercivity, square hysteresis loops, and their magnetization is greatly enhanced by tensile stress, achieving performance comparable to the best crystalline materials, with some stress‑induced improvements made permanent by annealing.
The preparation, structure, and mechanical properties of amorphous metallic alloys are briefly reviewed, and the magnetic properties, especially the low‐field properties of engineering interest, are described. The materials reported are ribbons about 1.5 mm by 35 μm in cross‐section, made under the trade name Metglas alloys by Allied Chemical Corp. These alloys have low coercive fields and very square hysteresis loops; the effective magnetization in low fields is greatly increased by the application of a tensile stress. When held under stress, amorphous ribbons have magnetic properties comparable to the best available crystalline materials. Some of the improvement due to stress can be made permanent by annealing under stress. Possible applications of these alloys are discussed.