Impact of H₂ High-Pressure Annealing Onto InGaAs Quantum-Well Metal–Oxide–Semiconductor Field-Effect Transistors With Al₂O₃/HfO₂ Gate-Stack

Abstract

We report on the impact of H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> high-pressure annealing (HPA) onto In <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.7</sub> Ga <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.3</sub> As MOSCAPs and quantum-well (QW) MOSFETs with Al <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> O <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> /HfO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gate-stack. After HPA with process condition of 300°C, H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ambient and pressure of 20 atm, we observed notable improvements of the capacitance-voltage (CV) characteristics in InGaAs MOSCAPs with Al <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> O <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> /HfO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gate-stack, such as reduction of equivalent-oxide-thickness and less frequency dispersion in the accumulation region. There was 20% improvement of the interfacial trap density (Dit). Then, we incorporated the HPA process into the fabrication of sub-100-nm In <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.7</sub> Ga <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.3</sub> As QW MOSFETs, to investigate the impact of HPA process. After HPA process, the device with L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">g</sub> = 50 nm exhibits improved subthreshold-swing (SS) = 105 mV/decade, in comparison with SS = 130 mV/decade for the reference device without HPA process. Finally, we carried out reliability assessment under a constant-voltage-stress (CVS), and it turns out that the HPA process was effective in mitigating a shift of threshold voltage (ΔV <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">T</sub> ) during the CVS. These are attributed to the effective passivation of oxide traps in the high-k dielectric layer and interfacial traps, after HPA process in the H <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ambient.