Dielectric and Piezoelectric Properties of (Bi<sub>0.5</sub>Na<sub>0.5</sub>)TiO<sub>3</sub>–(Bi<sub>0.5</sub>K<sub>0.5</sub>)TiO<sub>3</sub> Systems

Atsushi Sasaki, Tatsuya Chiba, Youichi Mamiya, E. Otsuki

Japanese Journal of Applied Physics · 1999 · 901 citations · 7 references

Concepts

TL;DR

The study synthesized (Bi₀.₅Na₀.₅)TiO₃–(Bi₀.₅K₀.₅)TiO₃ ceramics across X = 0–1.0 using conventional sintering to investigate their structural, dielectric, and piezoelectric properties. X‑ray diffraction revealed a morphotropic phase boundary at X = 0.16–0.20, where remanent polarization, electromechanical coupling, dielectric constant, piezoelectric constant, and elastic compliance peak, indicating enhanced dielectric and piezoelectric properties comparable to Pb(Zr,Ti)O₃.

Abstract

The structural, dielectric and piezoelectric properties of [Bi 0.5 (Na 1- X K X ) 0.5 ]TiO 3 ceramics were studied for the compositional range, X =0–1.0. The samples were prepared by a conventional sintering technique. From X-ray diffraction results, it was found that the morphotropic phase boundary (MPB) between (Bi 0.5 Na 0.5 )TiO 3 (rhombohedral) and (Bi 0.5 K 0.5 )TiO 3 (tetragonal) exists in the range of X =0.16–0.20. Polarization-Electric field hysteresis loops show that the remanent polarization at X =0.20 (BNTK20) is larger than that at X =0.0 (BNT). Peaks of electromechanical coupling factor, dielectric constant, piezoelectric constant and elastic compliance were obtained at X =0.16–0.20 of the MPB region. Dielectric and piezoelectric properties are enhanced in the MPB region for [Bi 0.5 (Na 1- X K X ) 0.5 ]TiO 3 , similar to that observed for Pb(Zr, Ti)O 3 .

References

7