The Influence of Water Assistance on the Character and Degree of Wear of Cutting Tools Applied in Roadheaders

Krzysztof Kotwica

Archives of Mining Sciences · 2011 · 17 citations · 3 references

Concepts

Abstract

In Polish mining industry the majority of headings are drilled by mechanical methods with the use of arm roadheaders. The tangential rotary picks used as cutting tools mounted on them undergo an accelerated process of wear in unfavourable geological and mining or incorrect work conditions. The article briefly presents the construction, nature of work and problems connected with wearing processes of tangential rotary picks mounted on roadheaders heads. There are described directions of performed works aiming to limit the wear of cutting tools applied on roadheaders heads, particularly considering high pressure water individual assistance of the mining process with tangential rotary picks. Implemented solutions of such assistance and obtained results have been included. There is also presented a new solution of water assistance applied in the holders of tangential rotary picks elaborated in the Department of Mining, Dressing and Transport Machines at the University of Science and Technology, Cracow. It relies on inner pressure lubrication with water or low-grade emulsion. The performed laboratory and industrial tests of the solution of the tangential rotary picks lubricated holder have been described.

References

3