SAE technical papers on CD-ROM/SAE technical paper series · 2004 · 12 citations · 2 references
EngineeringAutomotive EngineeringMechanical EngineeringBrake SystemsVehicle DynamicsVehicle TestingBraking DynamicsDisc BrakesDrum BrakesLateral Vehicle DynamicsPneumatic Brake SystemsVehicle StabilityAnti-jackknife ControlBraking Stability AnalysisControl Algorithm DevelopmentFriction CoefficientJackknife DynamicsPneumatic BrakesPneumatic Drum BrakesSurface Coefficient Of Friction
<div class="htmlview paragraph">This study investigated the jackknife stability of Class VIII double tractor-trailer combination vehicles that had mixed braking configurations between the tractor and trailers and dolly (e.g. ECBS disc brakes on the tractor and pneumatic drum brakes on the trailers and dolly). Brake-in-turn maneuvers were performed with varying vehicle loads and surface conditions. Conditions with ABS ON for the entire vehicle (and select-high control algorithm on the trailers and dolly) found that instabilities (i.e. lane excursions and/or jackknifes) were exhibited under conditions when the surface friction coefficient was 0.3. It was demonstrated that these instabilities could be avoided while utilizing a select-low control algorithm on the trailers and dolly. Simulation results with the ABS OFF for the tractor showed that a tractor equipped with disc brakes had greater jackknife stability. However, the vehicle left the intended path at an earlier moment in the maneuver than a vehicle equipped with drum brakes under the same simulated conditions.</div>
2
Ashley L. Dunn · OhioLink ETD Center (Ohio Library and Information Network) · 2003 · 30 citations · Full text
In-Depth Analysis of the Influence of High Torque Brakes on the Jackknife Stability of Heavy Trucks
Ashley L. Dunn, Gary J. Heydinger, Giorgio Rizzoni et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2003 · 21 citations
Engineering, Automotive Engineering, Mechanical Engineering +15