Journal of Asian Ceramic Societies · 2015 · 213 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallic MaterialsAlloysComposite MaterialsComposites ManufacturingMechanics Of Composite MaterialsMetal Matrix CompositesMetalsAluminium AlloysAluminum AlloysAluminum Matrix CompositesMicrostructureSilicon NitrideStir CastingTensile StrengthUltimate Tensile Strength
The present research work focuses on the production of aluminium (AA6082-T6) matrix composites reinforced with various weight percentage of silicon nitride particles by conventional stir casting route. The percentage of reinforcement is varied from 0 wt.% to 12 wt.% in a stage of 3%. The microstructures and mechanical properties of the fabricated aluminium matrix composites are investigated. The scanning electron microstructure images reveal the presence of Si3N4 particles in the aluminium matrix. The distribution of Si3N4 particles has also been recognized with X-ray diffraction technique. The mechanical properties such as ultimate tensile strength and hardness have improved at the cost of reduction in ductility with increase in weight percentage of silicon nitride particulates in the aluminium metal matrix. The density and porosity of the composites also show an increasing trend with increase in volume fraction of Si3N4 particles in the aluminium matrix.
34
Kazi Md. Shorowordi, Tahar Laoui, A.S.M.A. Haseeb et al. · Journal of Materials Processing Technology · 2003 · 683 citations
Natural Sciences, Materials Engineering, Materials Science +16
Al–Al3Ti nanocomposites produced in situ by friction stir processing
C.J. Hsu, Chun‐Ping Chang, P.W. Kao et al. · Acta Materialia · 2006 · 424 citations
Natural Sciences, Materials Engineering, Materials Science +14