Power Electronics

1947–1953 · 1 of 6

Transformer-Based Power Electronics

1947–1953

Transformer-Based Power Electronics

Contemporary themes

The mid-century period crystallized a paradigm shift from component-level studies to an integrated power-electronics approach, emphasizing the duality between electric and magnetic circuits and the construction of transformer-equivalent models for practical design. Interest grew in solid-state rectification, with copper oxide devices signaling a move toward rugged, efficient conversion and influencing later device development. Early exploration of nonlinear magnetization effects and high-voltage topologies also laid groundwork for compact, high-frequency signaling concepts in power systems.

  • Corona and high-voltage discharge phenomena were investigated and measured across large HV networks, emphasizing corona losses, radiative influence, and protective considerations under extreme voltages.
  • System-level hardware design and evaluation for Tidd HV test lines, covering insulators, line hardware, conductors, transformers, arresters, and switchgear to assess reliability and safety.
  • Approaches to line design and performance under direct lightning events, switching transients, and charging interruptions; emphasis on line responses to high-voltage transients.
  • Emergence of microstrip-based transmission concepts for power electronics, enabling compact transmission lines and high-frequency signaling for electric power systems.
  • Economic aspects of HV transmission and material choices, including series capacitors, high-voltage insulation, and large-scale system deployment.

Influential works

The introduction of transformer-equivalent circuit methods and non-linear modeling established enduring analytical tools that shaped subsequent transformer design and control. Foundational solid-state rectification concepts and high-voltage multiplier approaches foreshadowed later breakthroughs in efficient power conversion and pulsed-power systems. By bridging device technology with circuit theory, the period helped institutionalize power electronics as a distinct field and set the stage for rapid advances in devices, converters, and high-voltage engineering.

  • The Duality between Interlinked Electric and Magnetic Circuits and the Formation of Transformer Equivalent Circuits (1949) introduced a formal duality between electric and magnetic systems and showed how to form transformer equivalent circuits, enabling simplified modeling and widespread use of equivalent-circuit methods in transformer design and nonlinear analysis.
  • Power Rectifiers and Transistors (1952) surveys emerging power devices, charting the shift from vacuum tubes to transistors and the implications for efficiency, control, and reliability—helping establish power electronics as a field and guiding subsequent device development.
  • The Copper Oxide Rectifier (1951) presents early solid-state rectification with copper oxide diodes, signaling a move toward more rugged, efficient power conversion and influencing later detector/rectifier technology.
  • Equivalent circuits for transformers and machines including non-linear effects (1953) broadens transformer modeling by incorporating non-linear magnetization, saturation, and losses, enabling more accurate design and control under real operating conditions.
  • The Cockcroft-Walton Voltage Multiplying Circuit (1953) proposes a cascade circuit to multiply voltage, underpinning high-voltage power supplies and pulsed power systems and shaping early HV engineering and electronics design.

1954–1982

Unified Switching Modeling

Contemporary themes

During this period, research coalesced around unified analytic models for switching converters, high-frequency transmission concepts, and early integration of photovoltaic and microelectronic concepts into power electronics. Emphasis was placed on generalized power-stage models, modulation strategies for switching converters, microstrip and transmission-line analysis, and stability-oriented rectifier–inverter drives.

  • Unified modeling and modulation strategies for switching converters, spanning resonant current pulse modulation, generalized power-stage models, and efficient topologies. Exemplars:.
  • Microstrip- and transmission-line based analysis for high-frequency power electronics, addressing microstrip discontinuities, gaps, open circuits, and related capacitance modeling. Exemplars:.
  • PV-oriented energy conversion devices and semiconductor concepts, including MIS tunnel diodes and silicon solar converters, illustrating PV integration into power electronics. Exemplars:.
  • Rectifier–inverter drives: stability analysis, simplified representations, and PWM-based modulation to improve electric-motor drive performance. Exemplars:.
  • High-voltage and high-frequency transmission themes: HVDC power transmission, static power-frequency changers, and high-frequency link power conversion. Exemplars:.

Influential works

The era established foundational modeling and design frameworks—bridging state-space averaging with dynamic representations, enabling high-voltage modular inverter concepts, and contributing analytic conditions for efficient switching topologies that influenced later motor drives, RF power amplifiers, and on-chip HV generation.

  • The 1981 paper 'A New Neutral-Point-Clamped PWM Inverter' introduced a neutral-point-clamped (NPC) architecture enabling high-voltage, modular multilevel inverters with reduced switching losses and improved harmonic performance, a foundation for modern motor drives and grid-interfacing power electronics.
  • The 1976 paper 'A general unified approach to modelling switching-converter power stages' offered a comprehensive modeling framework for switching converters, combining state-space averaging with dynamic representations, and empowering stable control design and system-level optimization of power-electronic converters.
  • The 1977 paper 'Idealized operation of the class E tuned power amplifier' provides analytic conditions for Class E operation, yielding near-ideal power conversion with zero-voltage switching for RF amplifiers and inspiring later high-efficiency switching topologies.
  • The 1976 paper 'On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier technique' demonstrates on-chip HV generation via a voltage multiplier, a key step toward IC-based power electronics and compact HV sources.

1983–1989

Resonant High-Frequency Power

Contemporary themes

The period is characterized by resonant and zero-voltage switching concepts that dramatically reduce switching losses and enable compact, high-frequency DC-DC and DC-AC converters. A unifying framework brings together Class-E style analyses, resonant DC links, and resonant switching to improve efficiency and power density across topologies, while control architectures emphasize rapid dynamic response in inverters and motor drives through current/PWM strategies, adaptive hysteresis, and predictive control. Resonant topologies in distribution and high-frequency links further support efficient grid integration and compact power electronics.

  • Resonant and zero-voltage switching concepts dominated high-frequency power conversion, unifying Class-E style analyses, resonant DC links, and ZVS/HV switching to dramatically reduce switching losses and enable compact converters across DC-DC and DC-AC topologies.
  • Control architectures emphasizing rapid dynamic response for inverters and motor drives—current/Pulse-Width Modulation (PWM) control, adaptive hysteresis, and predictive current-vector strategies—emerge as the primary pattern for robust regulation under switching.
  • Motor-drive topology studies evaluate brushless AC servo drives, permanent-magnet synchronous drives, and microprocessor-based servo implementations—analyzing performance trade-offs, control strategies, and integration with electric machines.
  • Resonant topologies in distribution and high-frequency links characterize systems leveraging resonant high-frequency AC links, resonant DC links, and resonant switches to improve efficiency, power density, and grid integration.
  • Theoretical analysis and small-signal modeling of Class-E converters and power amplifiers show a concerted effort to derive exact solutions, dynamic behavior, and input-quality considerations for high-efficiency switching devices.

Influential works

The era produced pivotal advances such as instantaneous reactive power compensators using switching devices without energy storage, shaping modern dynamic VAR support and grid stability concepts. Foundational MOSFET small-signal modeling methods enhanced high-frequency switch analysis, complemented by a device figure of merit for high-frequency operation that guides fast, low-loss switching decisions. The publication on control of electrical drives connected power electronics with motor control strategies underpin later field-oriented and robust drive control developments.

  • Instantaneous Reactive Power Compensators Comprising Switching Devices without Energy Storage Components (1984) introduced instant reactive power compensation using switching devices without energy storage, enabling fast VAR support and compact dynamic regulation; it catalyzed modern solid-state compensators and DVR concepts in grid power quality.
  • A new method for determining the FET small-signal equivalent circuit (1988) provides a practical procedure to extract MOSFET small-signal parameters, improving accuracy of high-frequency switch modeling and circuit simulation; foundational for later device models in power electronics.
  • Power semiconductor device figure of merit for high-frequency applications (1989) proposes a figure of merit to compare devices for high-frequency operation, guiding device selection and research toward faster, lower-loss switching in converters.
  • Control of Electrical Drives (1985) surveys and develops control strategies for electrical drives, linking power electronics with motor control; its methodologies underpinned modern drive architectures, including field-oriented control and robust regulation.

1990–2005

Impedance-Boosted Multilevel Electronics

Contemporary themes

The 1990–2005 window saw power electronics coalescing around high-voltage, high-power converter concepts, with multilevel topologies enabling higher voltage operation, reduced switching losses, and improved waveform quality across grid interfaces and HV applications. There was a growing emphasis on grid-supporting power electronics for wind energy and flexible AC transmission systems, including back-to-back converters for grid support and static VAR generation. Researchers advanced modulation, averaging, and resonance-based strategies to enhance efficiency and dynamic response, while laying foundational design principles and pursuing compact, integrated implementations on silicon and RF hardware for high-frequency operation.

  • Emergence of multilevel inverter architectures enabling high-voltage, high-power operation with reduced switching losses and improved waveform quality across HV applications.
  • Grid-supporting power electronics for wind energy and FACTS: back-to-back PWM converters, static VAR generation, and scalable voltage control.
  • Modulation, averaging, and resonance-based strategies to optimize efficiency, losses, and dynamic response in power converters and drives.
  • Foundational design principles and system-level guidance for power electronics, including converters' design, applications, and essential reference texts.
  • Integration of power electronics concepts into ICs and RF hardware for high-frequency, compact implementations.

Influential works

The period catalyzed a paradigm shift by integrating multilevel and impedance-network concepts into practical HV converters, expanding the design space and enabling scalable, reliable energy conversion systems. Groundbreaking contributions—generalized averaging for switching circuits, back-to-back converters for wind energy, the Z-source inverter, and multilevel converter architectures—shaped subsequent research directions and industrial practice, influencing control strategies, topologies, and integration trends for years to come.

  • Generalized averaging method for power conversion circuits (1991) introduced a generalized averaging framework that reduces switching dynamics of converters to averaged models, enabling reliable design and control. It underpins PWM analysis, small-signal modeling and digital control, shaping early methods and continuing to influence modern power electronics theory and toolchains.
  • Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation (1996) proposed the DFIG topology that decouples rotor and stator dynamics via back-to-back converters, enabling efficient variable-speed wind energy, reduced mechanical wear, and flexible grid support. This work catalyzed wind-energy converter design and many subsequent control strategies.
  • Z-source inverter (2003) introduced an impedance network between the DC source and the inverter bridge, enabling voltage boosting without transformers and improved fault tolerance. This topology broadened design space for DC-AC conversion and inspired extensive follow-up in boosting networks and hybrid topologies.
  • Multilevel converters-a new breed of power converters (2002) presented the multilevel concept to synthesize high-quality voltages with reduced switching losses, enabling higher-voltage drives and HVDC applications. This work launched a family of topologies (NPC, cascaded H-bridge) that dominate modern high-power converters.

2006–2012

Multilevel Grid-Interactive Converters

Contemporary themes

The period saw multilevel converter architectures mature into the dominant paradigm for industrial high- and mid-voltage drives, enabling transformerless, modular, scalable topologies with reduced switching losses and broader PV/HVDC applicability. Inverter-based grid-support and distributed-generation control matured, employing droop, decentralized impedance-based control, and predictive/current-control strategies to ensure stable sharing and robust grid interaction. Bidirectional isolated DC–DC converter families emerged to reinforce energy flow between sources and storage, leveraging soft-commutation and phase-shift control to boost microgrid efficiency. Grid-compatible PV and wind interfaces were advanced to provide grid-support functionalities and efficient operation across variable conditions.

  • Multilevel converter architectures have matured into the dominant paradigm for industrial HV/mid-voltage drives, enabling transformerless, scalable topologies with modular construction, reduced switching losses, and broader PV/HVDC applicability across power electronics.
  • Grid-support and distributed-generation control rely on inverter-based strategies (droop, decentralized impedance-based control, and predictive/current-control) to ensure stable sharing, fault tolerance, and effective grid interaction.
  • Bidirectional isolated DC–DC converter families unify energy flow between sources and storage, using soft-commutation, phase-shift or dual-phase-shift control and transformerless architectures to boost efficiency in microgrids and HV applications.
  • Renewable-energy power electronics emphasize grid-compatibility and grid-support functionalities in PV and wind interfaces, including grid-connected PV modules, wind-turbine grid fault ride-through, and PM/DFIG converter strategies for reliable operation.

Influential works

  • Fundamentals of Power Electronics (2006) established a unified analytical framework for switching converters, covering topologies, modulation, control, and device physics, enabling systematic design and optimization; its rigorous treatment became the baseline reference for research and education in the field.
  • GaN-Based RF Power Devices and Amplifiers (2008) highlighted wide-bandgap GaN devices' superior voltage, speed, and efficiency, transforming RF power electronics by enabling compact, high-frequency amplifiers and high-efficiency converters; catalyzing widespread adoption of GaN in power electronics.
  • Grid Converters for Photovoltaic and Wind Power Systems (2010) synthesizes control strategies, grid-support functions, and reliability considerations for PV/Wind interfaces, shaping design norms and performance benchmarks that underpin scalable, grid-friendly power electronics.
  • Control of Power Converters in AC Microgrids (2012) articulates decentralized control approaches—voltage-frequency regulation, droop strategies, and energy sharing—for coordinating inverter-based resources, influencing modern microgrid architectures and stability analyses.

2013–2024

Wide-Bandgap Grid Power Electronics

Contemporary themes

The period centers on resilient, islanding-aware microgrids enabled by autonomous operation, AC/DC subgrids, adaptive droop control, and battery management to sustain operation through islanding and reconnection. It underscores scalable, cost-effective grid interfaces through multilevel and transformerless inverter architectures, including cascaded topologies, virtual DC-bus concepts, and high-frequency bidirectional links for PV-grid applications. Device-level efficiency and thermal management take precedence, featuring GaN transistors, advanced cooling concepts, and battery thermal strategies to boost performance; grid interfacing, impedance, and harmonic stability are pursued via modeling and robust control for DER-rich systems; triboelectric energy harvesting integrated with power electronics is also explored.

  • Pattern focuses on autonomous operation and reliability of power-electronics-enabled microgrids with AC/DC subgrids, adaptive droop control, and battery management to maintain resilience during islanding and re-connection.
  • Pattern emphasizes scalable, cost-effective grid interfaces via multilevel and transformerless inverter architectures, including cascaded topologies, virtual DC-bus concepts, and high-frequency bidirectional links for PV/grid applications.
  • Pattern centers on device-level efficiency and thermal management for energy storage and EV power electronics, highlighting GaN transistors, mini-channel cooling, and battery thermal strategies to boost performance and reliability.
  • Pattern covers grid interfacing, impedance, and harmonic stability through modeling of grid-connected converters, stability analysis, and robust switching/control for DER-rich power systems.
  • Pattern explores energy harvesting via triboelectric generators and electrification schemes integrated with power electronics to enable efficient mechanical-to-electrical energy conversion.

Influential works

Foundational texts shape the field: Fundamentals of Power Electronics offers a comprehensive framework of concepts, topologies, and design methods, guiding efficiency and reliability improvements. Reviews of Silicon Carbide power devices and GaN-on-Si power technology crystallize device physics and practical design guidelines for high-temperature, high-frequency converters, accelerating industry adoption. Battery charger topology reviews and discussions of energy-storage boundaries shape decisions for dynamic loads and power trains, with notable attention to battery versus supercapacitor roles in fast transients.

  • Fundamentals of Power Electronics (2020) systematizes core concepts, topologies, and design methods in power electronics, providing a unified framework that educated a generation of engineers and guided later advances in efficiency and reliability.
  • Review of Silicon Carbide Power Devices and Their Applications (2017) crystallizes performance advantages and device physics of SiC power devices, establishing design guidelines for high-temperature, high-frequency converters and accelerating industry adoption.
  • GaN-on-Si Power Technology: Devices and Applications (2017) demonstrates high-electron-mobility transistors enabling fast switching, low losses, and compact, efficient converters, driving GaN-based power solution development.
  • Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles (2013) maps charger topologies and charging strategies for PEVs, influencing standards and integration with grid, BMS, and power electronics control.
  • Where Do Batteries End and Supercapacitors Begin? (2014) clarifies energy-storage boundaries in power electronics by comparing batteries and supercapacitors, shaping component selection for dynamic load profiles and power trains.