Effect of the aging process and pre-deformation on the precipitated phase and mechanical properties of 2195 Al–Li alloy

Bingxin Xie, Liang Huang, Jiahui Xu, +5

Materials Science and Engineering A

Materials ScienceEngineeringMechanical PropertiesMechanical EngineeringAlloy Design +5

Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified

Yu Wang, Yunlai Deng, Qingsong Dai, +3

Materials Science and Engineering A

Materials ScienceMaterials EngineeringMagnetic PropertiesEngineeringMechanical Engineering +5

Microstructure evolution, mechanical property response and strengthening mechanism induced by compositional effects in Al–6 Mg alloys

Yu Wang, Bowei Yang, Minqiang Gao, +2

Materials & Design

Effect of asymmetric rolling and subsequent ageing on the microstructure, texture and mechanical properties of the Al-Cu-Li alloy

Yuankang Xie, Yunlai Deng, Yu Wang, +1

Journal of Alloys and Compounds

Materials ScienceSubsequent AgeingEngineeringAsymmetric RollingSevere Plastic Deformation +7

Dynamic recrystallization behavior and mechanical properties response of rheo-extruded Al–Mg alloys with various Mg contents

Bowei Yang, Minqiang Gao, Yu Wang, +1

Materials Science and Engineering A

Materials ScienceEngineeringMechanical EngineeringAlloy DesignMechanical Properties Response +4

Enhancing the tensile strength and heat resistance induced by high-density Ω phases in an Al–Cu–Mg–Ag alloy

Jicheng Fan, Bowei Yang, Yu Wang, +2

Journal of Materials Research and Technology

Materials ScienceMaterials EngineeringHigh DensityEngineeringMechanical Properties +13

Modification Mechanism of Rare Earth Eu on Eutectic Si in Hypoeutectic Al-Si Alloy

Feng Mao, Yongfeng Qiao, Po Zhang, +4

International Journal of Metalcasting

Materials ScienceMaterials EngineeringModification MechanismRare Earth MineralEngineering +6

Understanding the precipitation mechanism of copper-bearing phases in Al-Mg-Si system during thermo-mechanical treatment

Hongmei Jin, Renguo Guan, Xianxiang Huang, +6

Journal of Material Science and Technology

Materials ScienceMaterials EngineeringEngineeringMetallurgical SystemCorrosion +10

The response of mechanical property to the microstructure variation of an Al–Mg alloy by adding tin element

Bowei Yang, Yu Wang, Minqiang Gao, +1

Materials Science and Engineering A

Materials ScienceEngineeringMicrostructure VariationMechanical EngineeringAlloy Design +6

Optimization of squeeze casting process of gearbox cover based on FEM and Box-Behnken design

Junhong Li, Yu Sun, Yu Wang, +1

The International Journal of Advanced Manufacturing Technology

EngineeringMechanical EngineeringBox-behnken DesignManufacturing EngineeringGearbox Cover +3