This paper describes a short-reach serial link to connect chips mounted on the same package or on neighboring packages on a printed circuit board (PCB). The link employs an energy-efficient, single-ended ground-referenced signaling scheme. Implemented in 16-nm FinFET CMOS technology, the link operates at a data rate of 25 Gb/s/pin with 1.17-pJ/bit energy efficiency and uses a simple but robust matched-delay clock forwarding scheme that cancels most sources of jitter. The modest frequency-dependent attenuation of short-reach links is compensated using an analog equalizer in the transmitter. The receiver includes active-inductor peaking in the input amplifier to improve overall receiver frequency response. The link employs a novel power supply regulation scheme at both ends that uses a PLL ring-oscillator supply voltage as a reference to flatten circuit speed and reduce power consumption variation across PVT. The link can be calibrated once at an arbitrary voltage and temperature, then track VT variation without the need for periodic re-calibration. The link operates over a 10-mm-long on-package channel with −4 dB of attenuation with 0.77-UI eye opening at bit-error rate (BER) of 10 ⁻¹⁵ . A package-to-package link with 54 mm of PCB and 26 mm of on-package trace with −8.5 dB of loss at Nyquist operates with 0.42 UI of eye opening at BER of 10 ⁻¹⁵ . Overall link die area is 686

$\mu \text{m}\,\,\times $

565

$\mu \text{m}$

with the transceiver circuitry taking up 20% of the area. The transceiver’s on-chip regulator is supplied from an off-chip 950-mV supply, while the support logic operates on a separate 850-mV supply.

#	Concept	H-Index	Publications	Citations
1	Engineering	1	1	61
2	Computer Engineering	1	1	61
3	Low-power Electronics	1	1	61

	Year	Citations

About

Top Concepts