K.H. Kim - Concepedia

Author

K.H. Kim

Korea Atomic Energy Research Institute

Also Known As

K.H. Kim, Kwangseo Kim

Publications

185

Citations

H-Index

Concepts

All Affiliations

Korea Atomic Energy Research Institute Korea University of Science and Technology

About

K.H. Kim is an author at Korea Atomic Energy Research Institute specializing in engineering, materials science, and mechanical engineering.

Top Concepts

#	Concept	H-Index	Publications	Citations
1	Engineering	8	8	183
2	Materials Science	7	7	161
3	Mechanical Engineering	6	6	128
4	Materials Engineering	4	4	73
5	Mechanics Of Materials	2	2	55

K.H. Kim

Publications

183

Citations

H-Index

Page 1

	Year	Citations
Control of surface hardnesses, hardening depths, and residual stresses of low carbon 12Cr steel by flame hardening Min‐Ku Lee, G.H. Kim, K.H. Kim, Surface and Coatings Technology Materials ScienceEngineeringLow Carbon 12CrMechanical EngineeringSurface Hardnesses	2003	38
Effects of the surface temperature and cooling rate on the residual stresses in a flame hardening of 12Cr steel Min‐Ku Lee, G.H. Kim, K.H. Kim, Journal of Materials Processing Technology Materials ScienceEngineeringSurface TemperatureFlame HardeningHot Working	2006	33
Growth of isothermally-solidified titanium joints using a multi-component Zr–Ti–Cu–Ni–Be amorphous alloy as a brazing filler Min‐Ku Lee, K.H. Kim, J.G. Lee, Materials Characterization Materials ScienceMaterials EngineeringBrazing FillerEngineeringMechanical Engineering	2013	29
A FLOW AND PRESSURE DISTRIBUTION OF APR+ REACTOR UNDER THE 4-PUMP RUNNING CONDITIONS WITH A BALANCED FLOW RATE Dong-Jin Euh, K.H. Kim, Y. J. Youn, Nuclear Engineering and Technology Gas-liquid FlowNuclear ReactorsEngineeringThermal Hydraulics	2012	22
Growth and microstructure formation of isothermally-solidified Zircaloy-4 joints brazed by a Zr–Ti–Cu–Ni amorphous alloy ribbon K.H. Kim, Chaewook Lim, J.G. Lee, Journal of Nuclear Materials Materials ScienceMaterials EngineeringIsothermally-solidified Zircaloy-4 JointsEngineeringMechanical Engineering	2013	18
Numerical correlation of the cavitation bubble collapse load and frequency with the pitting damage of flame quenched Cu–9Al–4.5Ni–4.5Fe alloy Min‐Ku Lee, Seok Min Hong, G.H. Kim, Materials Science and Engineering A Materials ScienceCavitating FlowEngineeringCorrosionHydrodynamic Cavitation	2006	17
Brazing characteristics of a Zr–Ti–Cu–Fe eutectic alloy filler metal for Zircaloy-4 Jung G. Lee, Chaewook Lim, K.H. Kim, Journal of Nuclear Materials Materials ScienceMaterials EngineeringEngineeringMechanical EngineeringAlloy Phase	2013	15
Compositional effects of Zr-rich multi-component brazing alloys on the corrosion of Zr alloy joints K.H. Kim, J.G. Lee, G.J. Lee, Corrosion Science Materials EngineeringMaterials ScienceCompositional EffectsCorrosion ProtectionEngineering	2014	11

Page 1