This study investigated the decontamination performance of a bioretention system using a sand-based filler constructed using sand and peat soil. The filler was constructed according to a simple proportioning method that considers water turnover time and organic content. Different inorganic constituents were added to the filler including zeolite, volcanic rock, coal slag, vermiculite and perlite to further improve the decontamination effect. Total suspended solids (TSS), total phosphorus (TP), ammonium nitrogen (NH4+-N), total nitrogen (TN) and chemical oxygen demand (COD) were measured in the influent and effluent. The results showed that: (1) the overall removal effect of the sand-based filler was satisfactory, indicating a certain feasibility and practicality of the method; (2) bioretention based on the sand-based filler had a better performance in removing TSS and TP with the removal rate both over 95%, and the addition of inorganic constituents to the filler was beneficial to TSS removal due to the effect of cumulative filtration capabilities of multiple materials, while phosphate was easily adsorbed by the positively charged particles of the peat soil; (3) the high removal rate of NH4+-N was due to adsorption and it could reach more than 80% by adding inorganic constituents with good adsorption such as zeolite vermiculite and perlite. Similarly, the addition of vermiculite and coal slag could increase the removal rate of COD by 15-25%. This research offers a novel alternative for guiding the selection and proportion of fillers in bioretention systems.

Qiumei He

Publications