Early Spray Development in Gasoline Direct-Injected Spark Ignition Engines

Abstract

<div class="htmlview paragraph">The characteristics of the early development of fuel sprays from pressure swirl atomizer injectors of the type used in direct injection gasoline engines is investigated. Planar laser-induced fluorescence (PLIF) was used to visualize the fuel distribution inside a firing optical engine.</div> <div class="htmlview paragraph">The early spray development of three different injectors at three different fuel pressures (3, 5, and 7 MPa) was followed as a function of time in 30 μsec intervals. Four phases could be identified: 1) A <i>delay phase</i> between the rising edge of the injection pulse and the first occurrence of fuel in the combustion chamber, 2) A <i>solid jet</i> or pre-spray phase, in which a poorly atomized stream of liquid fuel during the first 150 μsec of the injection. 3) A <i>wide hollow cone</i> phase, separation of the liquid jet into a hollow cone spray once sufficient tangential velocity has been established and 4) A <i>fully developed</i> spray, in which the spray cone angle is narrowed due to a low pressure zone at the center.</div> <div class="htmlview paragraph">The spray penetration, quality of atomization and the specific fuel distribution during the duration of injection (about 2 ms or 12 CAD) are functions of fuel delivery pressure as well as ambient pressure. The experiments are intended for future comparison with computational results, as well as for guidance in the the design of GDI combustion systems.</div>