Publication | Closed Access
In-Vessel Retention of Molten Core Debris in the Westinghouse AP1000 Advanced Passive PWR
10
Citations
0
References
2002
Year
Unknown Venue
EngineeringEnergy EfficiencyReactor DesignMechanical EngineeringReactor PhysicsNuclear Reactor DesignRefrigerationMolten Core DebrisThermal ModelingThermodynamicsNuclear ReactorsThermal ProtectionIn-vessel RetentionHeat TransferThermal HydraulicsHeat Transfer EnhancementThermal ManagementReactor SafetyIvr PhenomenaThermal EngineeringThermo-fluid Systems
In-vessel retention (IVR) of molten core debris via external reactor vessel cooling is the hallmark of the severe accident management strategies in the AP600 passive PWR. The vessel is submerged in water to cool its external surface via nucleate boiling heat transfer. An engineered flow path through the reactor vessel insulation provides cooling water to the vessel surface and vents steam to promote IVR. For the 600 MWe passive plant, the predicted heat load from molten debris to the lower head wall has a large margin to the critical heat flux on the external surface of the vessel, which is the upper limit of the cooling capability. Up-rating the power of the passive plant from 600 to 1000 MWe (AP1000) significantly increases the heat loading from the molten debris to the reactor vessel lower head in the postulated bounding severe accident sequence. To maintain a large margin to the coolability limit for the AP1000, design features and severe accident management (SAM) strategies to increase the critical heat flux on the external surface of the vessel wall need to be implemented. A test program at the ULPU facility at University of California Santa Barbara (UCSB) has been initiated to investigate designmore » features and SAM strategies that can enhance the critical heat flux. Results from ULPU Configuration IV demonstrate that with small changes to the ex-vessel design and SAM strategies, the peak critical heat flux in the AP1000 can be increased at least 30% over the peak critical heat flux predicted for the AP600 configuration. The design and SAM strategy changes investigated in ULPU Configuration IV can be implemented in the AP1000 design and will allow the passive plant to maintain the margin to critical heat flux for IVR, even at the higher power level. Continued testing for IVR phenomena is being performed at UCSB to optimize the AP1000 design and to ensure that vessel failure in a severe accident is physically unreasonable. (authors)« less