Transportation Research Record Journal of the Transportation Research Board · 1995 · 14 citations · 2 references
EngineeringCivil EngineeringMaterials EngineeringMaterials CharacterizationPolymer EngineeringSpectroscopic AnalysisAsphalt MaterialsConcrete MaterialsPavement MaterialsPaving MaterialsPolymer AnalysisPolymer CharacterizationAsphalt ConcreteAsphalt MixturesButadiene RubberCalibration CurvesEthylene Vinyl AcetateHot Mix AsphaltInfrared Spectroscopic AnalysisQuantitative Determination
The addition of polymers in asphalt cement has been widespread. Quantitative analysis of these polymers is essential to verify if specifications are being met. The analysis of two styrene butadiene rubber (SBR) latexes and ethylene vinyl acetate (EVA) and styrene butadiene styrene (SBS) polymers in three different asphalts was accomplished by Fourier transform infrared (FTIR) spectroscopy. Although the behavior of each SBR latex in each asphalt yielded somewhat different calibration curves, each latex-modified asphalt cement was successfully quantified. The values for latex determined by FTIR spectroscopy yielded a more linear relationship between the dynamic shear measurements and the latex concentration than the nominal values that accompanied the mixtures. Both EVA and SBS polymers were also quantified by using the analysis that was developed for the SBR latex-modified asphalt. The infrared analysis of SBR latex in asphalt was directly applied to the analysis of SBR latex in asphalt-aggregate mixes. Analysis of 3 weight percent SBR latex in asphalt concrete samples was achieved by removing the SBR latex-modified asphalt from aggregates and analyzing the latex content by FTIR spectroscopy. Three different aggregate types, gravel, granite, and limestone, were used.
2
J C Petersen · Transportation Research Record Journal of the Transportation Research Board · 1986 · 98 citations
H Plancher, S. M. Dorrence, J C Petersen · Association of Asphalt Paving Technologists Proc · 1977 · 73 citations