Sparking plasma sintering of tungsten carbide nanopowders

Yu. V. Blagoveshchenskiy, Yu. G. Lopatin, E. S. Smirnova, Alexander A. Popov, A. V. Semenycheva

Nanotechnologies in Russia · 2015 · 14 citations · 30 references

Concepts

Abstract

Spark Plasma Sintering studies of the high-speed consolidation of pure tungsten carbide WC nanopowders have been carried out. The influence of the initial size of the WC nanoparticles and modes of their receiption the density, structural parameters, and mechanical properties of tungsten carbide are studied. Samples of high-density nanostructured tungsten carbide with high hardness (up to 31–34 GPa) and an increased crack resistance (4.3–5.2 MPa m 1/2 ) are obtained. It is found that the effect of accelerating tungsten carbide nanopowder sintering under conditions of high-speed heating is associated with the acceleration of diffusion along grain boundaries in the sintered material. It is shown that the nonmonotonic dependence of the optimal sintering temperature on the initial grain size is caused by a change in grain-boundary diffusion coefficient in conditions of abnormal grain growth. It is found that the size of abnormally large grains in spark plasma sintering depends on the volume fraction of particles of the nonstoichiometric phase.

References

30