NASA Technical Reports Server (NASA) · 1966 · 54 citations · 1 references
Open access
EngineeringAerospace EngineeringMechanical EngineeringCombustionInternal Combustion EnginesPropulsionCombustion FundamentalsCombustion In Propulsion SystemsEngine DesignPropellant ChemistryPropulsion System PerformanceRocket PropulsionFuel InjectionPropellant InjectionRocket Engine NozzlesRocket Engine PerformanceRocket Engine Testing
An investigation was conducted at the Lewis Research Center to determine the effect of changes in propellant injection areas on screech stability characteristics of a rocket engine.Thirteen concentric tube injectors were evaluated: nine configurations with conventional straight-bore oxidizer elements, two configurations with taper-reamed oxidizer elements, one configuration with counterbored oxidizer elements, and one configuration with recessed oxidizer elements.Stability data were obtained at a chamber pressure of 300 pounds per square inch absolute and over a range of oxidant-fuel ratios from 4 to 7. Hydrogen injection temperature was used to rate the stability of the various designs.The injector with the lowest self-triggering temperature was considered to be the most stable design.The hydrogen temperature at which screech occurred could be reduced to less than 6 0 ' R (minimum available) by selection of hydrogen-to-oxygen injection area ratios of less than one.The combustion stability boundary correlated with hydrogen-to-oxygen injection velocity ratio irrespective of the hydrogen temperature level; at a velocity ratio 1 1 above 6-combustion was stable and below 6-, unstable.The stable operating limits of 2 2both the tapered and counterbored oxidizer element configurations correlated with data of conventional injectors when based on exit area ratio.Recessing the oxidizer tubes below the surface of the faceplate also improved the stability. INTRO DU CTlONAlthough numerous comprehensive investigations of high-frequency combustion instability have been conducted in both laboratory and full scale rocket engines, very little design information has been generated to assist in the development of future engines.
1