Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · 1997 · 11 citations · 25 references
Open access
EngineeringMechanical EngineeringAir ConditioningHeat TransferThermal AnalysisAir Conditioning SystemsCondensation Heat TransferHeat ExchangeHeat ExchangersRefrigerationRefrigeration SystemsCondenser PerformanceCondensing Heat ExchangersFlow Through Heat ExchangersHeat Exchanger DesignHeat Exchanger PerformanceHeat Exchanger Performance AnalysisVortex Shedding Effects
The effects of condensation on the air-side performance of plate-fin-tube heat \nexchangers have been experimentally investigated by conducting experiments under dry \nconditions and then repeating these experiments under condensing conditions. Sensible air-side \nheat transfer coefficients and friction factors are reported and compared for these cases. Realtime \nand steady-state measurements of condensate retention are reported for both coated and \nuncoated heat exchangers with fin spacings of 4, 8, 10 and 12 fpi (fins per inch). An initial \nmodel has been developed to predict the quantity of condensate retained on plate-fin-tube heat \nexchangers with wide fin spacings as a function of the heat exchanger geometry, advancing \nand receding contact angles, and air-side Reynolds number. This model demonstrates \ncondensate retention modeling techniques and possible improvements to these techniques are \ndiscussed. Experiments were conducted in an optically accessible test section and photographs \nof retained condensate are provided. These photographs identify the modes of condensation \nand condensate geometries observed during the experiments. Advancing and receding contact \nangle were measured using a contact angle goniometer for typical heat transfer surfaces. These \nmeasurements indicated a significant increase in surface wettability during the first 100 hours \nof wet-dry cycling.
25