NASA Technical Reports Server (NASA) · 2002 · 15 citations · 1 references
EngineeringMaterials EngineeringMaterials SciencePlasma PhysicsPropulsionSurface ScienceErosionHall Effect ThrustersIon PropulsionPlasma PropulsionPlasma-wall InteractionsErosion MechanismsErosion Rate MeasurementErosion RatesErosion ResistanceEtch RateHigh-power Hall ThrustersSputteringSputtering Processes
The durability of a high-powered Hall thruster may be limited by the sputter erosion resistance of its components. During normal operation, a small fraction of the accelerated ions will impact the interior of the main discharge channel, causing its gradual erosion. A laboratory experiment was conducted to simulate the sputter erosion of a Hall thruster. Tests of sputter etch rate were carried out using 300 to 1000 eV Xenon ions impinging on boron nitride substrates with angles of attack ranging from 30 to 75 degrees from horizontal. The erosion rates varied from 3.41 to 14.37 Angstroms/[sec(mA/sq cm)] and were found to depend on the ion energy and angle of attack, which is consistent with the behavior of other materials.
1
NASA's Hall Thruster Program 2002
Robert S. Jankovsky, David Jacobson, Charles Sarmiento et al. · 2002 · 23 citations