Characteristics of the Turbulent Boundary Layer on a Flat Plate in Compressible Flow from Measurements of Friction in Pipes

Hans U. Eckert

Journal of the aeronautical sciences. [REQUEST TITLE] · 1950 · 12 citations · 5 references

Concepts

Abstract

With the development of high-speed aerodynamics, the influence of compressibility on the boundary layer becomes of growing importance. In the case of laminar flow, this influence has been treated in numerous papers, while for the turbulent boundary layer, which is less convenient to treat analytically, the literature is rather scarce. From the practical standpoint, however, the latter is in all probability the more important, since the transonic and supersonic velocities achieved at the present time are, in general, connected with Reynolds Numbers that , according to experience with incompressible flow, should lie well in the turbulent range. In cases of extremely high supersonic speeds only, since they will be restricted to gases of low density, Reynolds Numbers will be low enough so that extensive laminar boundary layers can be expected. Hence, extensive turbulent boundary layers will mainly occur in the low and medium Mach Number ranges. Therefore, it seems to be worth while to approach the problem by starting with formulas for incompressible flow and to allow for the heat due to friction by introducing simplified thermodynamic relations. Attempts of this kind have been made by von Karman, Frankl, and Tetervin. They require, however, certain arbitrary assumptions regarding appropriate values for density and viscosity (values at the wall surface, in the free stream, or some mean values) which can be established only by experiments. The present paper attempts to eliminate the arbitrary character by applying the results of tests in pipes to the plate problem by a method analogous to that used first for the incompressible case by Prandtl and von Karman.

References

5