Mechanical Assessment of Large Photovoltaic Modules by Test and Finite Element Analysis

S. Dietrich, Martin Sander, Matthias Ebert, J. Bagdahn

EU PVSEC · 2008 · 12 citations · 0 references

DOIFull text

Open access

Concepts

Abstract

The mechanical behavior of PV modules was investigated for four point mounting regarding to the positioning of the clamps and the influence of polymers (e.g. EVA) with their stiffness properties. Experiments were carried out by means of testing PV module dummies assembled by a glass – polymer – glass laminate. The used polymer was EVA. The results of the test showed a time dependent behavior of the module displacement under constant load. This was due to the fact that EVA shows visco-elastic material properties (e.g. creeping). Since the laminate comprises a shear compound, stiffness properties of the EVA are directly influencing the stiffness of the PV module. By means of numerical calculations this influence of the shear compound was assessed. It was determined that the difference of the calculation of the displacement considering a flexible shear compound was up to 60 % compared to considering no shear between the glass sheets. The stiffness properties of EVA are altering over time of loading and temperature. This was investigated by changing the shear modulus in the FE model. It was highlighted that a change of the shear modulus has a significant impact on the displacement as well as the stresses. An optimized mounting showed that there is a minimum for the stresses in the glass at certain mounting positions. It turned out that for different load levels this minimum shifts to different positions, which was due to the fact of non-linearities of the PV module.