Transportation Research Record Journal of the Transportation Research Board · 1991 · 22 citations · 0 references
EngineeringCivil EngineeringGeotechnical EngineeringPavement EngineeringStructural AnalysisPavement DesignPavement EvaluationPavement GeotechnicsPavement MaterialsPavement Performance AnalysisPavement Structural AnalysisBackcalculation Of Layer ModuliDeflection AnalysisDeflection MeasurementElastic ModuliExponential Curve FittingFalling Weight Deflectometer TestingNondestructive TestingPavement Structural Performance
Deflection basins from any nondestructive testing device can be characterized by parameters that describe the structural characteristics of an existing pavement. An exponential curve of the form Y equals A times e to the BX power, where Y is the deflection in mils and X is the radial distance in inches, approximates the deflection basins simulated from elastic layer theory and measured by the falling weight deflectometer (FWD). The coefficients A and B describe the structural characteristics of the pavement. Usually, a pavement with a stiffer upper layer or layers is indicated by a lower A value, whereas a stiff subgrade or the presence of a rigid bottom at a shallow depth (or both) is indicated by a higher B value. The value of the coefficient of determination for the exponential fit, R-squared, was found useful for judging the suitability of an FWD-measured basin for backcalculation of layer moduli in a deflection-matching technique. Generally, a low value of R-squared for an exponential curve fitted to an FWD-measured basin indicates that there will be a high error in the backcalculation of layer moduli using elastic layer theory. Guidelines are presented for using the value of R-squared to indicate the error between measured and computed deflections that can be expected during a backcalculation analysis.