Road and transport research · 1992 · 11 citations · 0 references
EngineeringCivil EngineeringInstrumentationMetrologyPavement EngineeringMechanical MeasurementPavement EvaluationPavement Performance AnalysisComparative Case Study DesignGeotechnical Instrumentation In PavementsMeasurement AccuracyPavement Profile Measurement
The automated dynamic cone penetrometer (DCP) described in this paper was designed to improve in situ investigation of road and runway pavements and subgrades. The device developed requires fewer personnel to operate and is easier to use, and provides the means for a quick yet reliable evaluation of the above elements under various in situ conditions. In order to find out whether the population of the automated DCP device readings is identical to or different from that of the manual DCP device, comparative measurements were carried out with these two devices: this comparative study is described in the paper. It indicates that the automatic DCP device provides similar results to those produced by the manual device. However, it is suggested that reducing the translated California bearing ratio (CBR) results out of the automated DCP values, by some 15 per cent, be considered. Finally, the derived value for the precision of the automated DCP measurements (assumed in the analysis to be equal to that of the manual DCP measurements) was found to be compatible with the previous published values. Thus, the use of the automated DCP device is fully recommended as an efficient substitute to the manual DCP device, from the point of view of both precision and technical testing conditions of the two devices discussed.