Ultra-High-Performance-Concrete for Michigan Bridges Material Performance – Phase I

Theresa M. Ahlborn, Erron J. Peuse, Donald Misson

2008 · 51 citations · 17 references

Concepts

Abstract

One of the latest advancements in concrete technology is Ultra-High Performance Concrete (UHPC). UHPC is defined as concretes attaining compressive strengths exceeding 25 ksi (175 MPa). It is a fiber-reinforced, denselypacked concrete material which exhibits increased mechanical performance and superior durability to normal and high strength concretes. UHPC has great potential to be used in the bridge market in the United States. However, to gain acceptance by designers, contractors, and owners this material needs to be tested according to American Society for Testing and Materials (ASTM) International and American Association of State Highway Transportation Officials (AASHTO) standards, and new practices must be developed. The focus of this research was to investigate how the age at which UHPC undergoes a steam (thermal) treatment affects some mechanical and durability properties. Four mechanical properties (compressive strength, modulus of elasticity, Poisson’s ratio, and flexural characteristics) and properties related to durability (chloride ion penetration resistance, freeze-thaw durability, and coefficient of thermal expansion) were investigated. The testing was conducted with differing curing conditions and at different ages to examine how these factors influence each of the measured properties. Specimens, independent of age at thermal treatment, yielded compressive strengths of over 30 ksi, modulus of elasticity values in excess of 8000 ksi, and a Poisson’s ratio of 0.21. Flexural characteristics were dependent on curing regime. Testing consistently validated that UHPC had negligible chloride ion penetration, a high resistance to freeze-thaw cycling (durability factor of 100), and coefficient of thermal expansion values similar to that of normal strength concretes for both ambient cured and thermally treated specimens. Additional results revealed UHPC’s autogenous healing properties while undergoing freeze-thaw cycling, low variability between batches, and the reproducibility of results between different U.S. laboratories. Lastly, recommendations were developed for future testing of UHPC durability properties and a preliminary lifecycle cost comparison showed that the low life-maintenance costs of UHPC can offset higher initial costs, especially as the use of UHPC in the U.S. increases and the initial cost of the material decreases.

References

17