Buildings · 2025 · 21 citations · 57 references
EngineeringChemical EngineeringCivil EngineeringGeoenvironmental EngineeringGeotechnical EngineeringSoil MechanicsHigh-performance PolymersSilicate MineralogyCompressive StrengthDryingHeavy Metal ContentShrinkageShrinkage During DryingSilicate Chemistry
This study investigates the influence of SiO2/Al2O3 molar ratios (2.25–3.00) and the replacement of red mud (RM) with GGBS (50–63%) on the performance of RM-based geopolymers to address the environmental issues posed by RM, including its high alkalinity and heavy metal content. The results indicated that increasing the SiO2/Al2O3 ratio and incorporating GGBS reduced the fresh properties of the geopolymers. A higher SiO2/Al2O3 ratio promoted the development of compressive strength, likely due to the elevated concentration of soluble silicates. The RM-based geopolymers with higher GGBS content also exhibited greater compressive strength. Moreover, the drying shrinkage and water permeability of RM-based geopolymers increased as the SiO2/Al2O3 ratio and the GGBS content increased. The sustainability assessment revealed that CO2 emissions were influenced by the SiO2/Al2O3 ratio. In comparison to other RM-based geopolymers, the CO2 emissions and costs in this study were reduced by 13.13–44.33% and 3.64–39.68%, respectively. This study discusses the effects of the SiO2/Al2O3 molar ratios on the reaction process and strength formation mechanism of RM-based geopolymers, which provides an effective strategy for the resource utilization of RM.
57
Geopolymer technology: the current state of the art
Peter Duxson, A. Fernández‐Jiménez, John L. Provis et al. · Journal of Materials Science · 2006 · 4.5K citations
Jianhe Xie, Junjie Wang, Rui Rao et al. · Composites Part B Engineering · 2018 · 564 citations