3D printed CNT/TPU triboelectric nanogenerator for load monitoring of total knee replacement

Osama Abdalla, Mahmood Chahari, Milad Azami, Amir Ameli, Emre Salman, Milutin Stanaćević, Ryan Willing, Shahrzad Towfighian

Smart Materials and Structures · 2025 · 11 citations · 49 references

DOIFull text

Open access

Concepts

Abstract

Abstract This study presents the development and characterization of a novel triboelectric nanogenerator (TENG) designed as a self-powered sensor for load monitoring in total knee replacement (TKR) implants. The triboelectric layers comprise a 3D-printed thermoplastic polyurethane (TPU) matrix with carbon nanotube (CNT) nanoparticles and kapton tape, sandwiched between two copper electrodes. To optimize sensor performance, the proposed CNT/TPU TENG sensor is fabricated with varying CNT concentrations and thicknesses, enabling a comprehensive analysis of how material composition and structural parameters influence energy harvesting efficiency. The 1% CNT/TPU composite demonstrates the highest power output among the tested samples. The solid CNT/TPU-based TENG generated the apparent output power of 4.1 µ W under a cyclic compressive load of 2100 N, measured across a 1.6 GΩ load resistance and over a nominal contact area of 15.9 cm 2 , while the foam CNT/TPU film achieved a higher apparent output power of 6.9 µ W measured across a 0.9 GΩ load resistance with the same nominal area. The generated power is sufficient to operate a power management and ADC circuit based on our earlier work. The sensors exhibit a stable open-circuit voltage of 320 V for the foam layer and 275 V for the solid one. Sensitivities are 80.50 mV N −1 ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" overflow="scroll"> <mml:mrow> <mml:mtext>⩽</mml:mtext> <mml:mstyle scriptlevel="0"/> <mml:mn>1600</mml:mn> </mml:mrow> </mml:math> N) and 24.60 mV N −1 (&gt; 1600 N) for foam CNT/TPU film, demonstrating the integrated sensor capability for wide-range force sensing on TKR implants. The foam CNT/TPU-based TENG maintained stable performance over 16 000 load cycles, confirming its potential for long-term use inside the TKR. Additionally, the dielectric constant of the CNT/TPU composite was found to increase with increasing CNT concentration. The proposed CNT/TPU TENG sensor offers a broad working range and robust energy-harvesting efficiency, making it appropriate for self-powered load sensing in biomedical applications.

References

49