Thin-Walled Structures · 2025 · 11 citations · 41 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingMechanical Behavior Of MaterialsStructural Materials3D PrintingDesign For Additive ManufacturingDuctilityStrength Of MaterialsStress-strain BehaviorTensile PropertiesAuxetic StructuresEnergy AbsorptionEnergy Absorption CharacteristicsFracture MorphologyFracture Surface MorphologyMicroscopic Material AnalysisStiffnessThree-dimensional Printing
This study examines the effects of manufacturing parameters on the mechanical properties of 3D-printed re-entrant auxetic structures under quasi-static and dynamic compression conditions. The influences of base material (PLA and short carbon fibre-reinforced PLA), nozzle diameter (0.4 mm and 0.6 mm), and printing direction were systematically analysed. Experimental results revealed that peak force and energy absorption could be significantly enhanced by proper printing direction. While the addition of short carbon fibres effectively increased stiffness, it also introduced brittleness that was detrimental to energy absorption. However, the impact of nozzle diameter was relatively minor and varied with test conditions. Microscopic analysis of printing quality and fracture surface morphology provided further insights into the fundamental roles of manufacturing parameters in determining the mechanical behaviour of re-entrant structures.
41
Anisotropic material properties of fused deposition modeling ABS
Sung‐Hoon Ahn, Michael Montero, Dan Odell et al. · Rapid Prototyping Journal · 2002 · 2.3K citations
Mechanical Metamaterials and Their Engineering Applications
James Utama Surjadi, Libo Gao, Huifeng Du et al. · Advanced Engineering Materials · 2019 · 953 citations
Natural Sciences, Materials Engineering, Materials Science +17