Heliyon · 2025 · 11 citations · 63 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials CharacterizationCalcium Phosphate MaterialsCeramic BiomaterialsCrystallite Size AnalysisCrystallite Size DeterminationDiffraction PatternsMicrostructureMineral Phase CompositionPrecursor ChemistryStrontium-doped HydroxyapatiteX-ray Diffraction Phase Analysis
) shell waste as a calcium precursor. SLS were calcined at 0 °C, 600 °C, 800 °C, and 1000 °C and characterized by X-ray diffraction (XRD). HAp and SrHAp were analyzed by XRD and transmission electron microscopy (TEM). XRD results revealed that SLS calcined at 1000 °C displayed a Ca(OH)2 phase, while those calcined at other temperatures showed a CaCO3 phase. The characterization also verified the diffraction patterns of HAp and SrHAp according to the reference model. Various methods, including the Scherrer method, linear straight-line Scherrer method, Monshi-Scherrer method, Williamson-Hall plot, size-strain plot, and Halder-Wagner method, were employed to investigate the microstructure parameters (crystallite size and microstrain). All methods resulted in varied yet comparable results of crystallite size, except for the linear straight-line Scherrer method. The TEM results showed that the particle sizes of HAp and SrHAp were approximately 130 nm. In this study, the W-H plot was regarded as the best method for providing additional information on anisotropy elasticity and consistent crystallite size results.
63
IOP Conf. Ser.: Mater. Sci. Eng. 117 012045
Menghuai Wu, Alexander Vakhrushev, Andreas Ludwig et al. · 2016 · 5K citations
Natural Sciences, Materials Engineering, Materials Science +7