High-Rate 4.2 V Solid-State Potassium Batteries by In Situ Polymerized Epoxide Ether Electrolyte

Abstract

Solid-state metallic potassium batteries (SSMPBs) afresh have attracted incremental attention because of their potential to supplement solid-state metallic lithium batteries. However, SSMPBs suffer poor electrochemical performances due to the low ionic conductivity of solid electrolytes and huge electrode/electrolyte interfacial resistance. Herein, high-rate SSMPBs are achieved by in situ ring-opening polymerization of 1,3-dioxolane with succinonitrile as a plasticizer and Al(OTf) 3 as the catalyst, where the succinonitrile enables short-chain polyether electrolytes. The in situ polymerized electrolytes deliver a high ionic conductivity of 4.5 × 10 –5 S cm –1 at room temperature and excellent stabilities at high oxidation potentials (4.2 V vs K + /K) and against metallic K anodes. All these result in SSMPBs with a discharge capacity of 69 mAh g –1 under a high rate of 100 mA g –1 and a retention of 88.8% after 100 cycles, and the rate and capacity retention are higher than those in previous work on SSMPBs.