Role of prior austenite grain boundary and retained austenite in strain localization of medium-carbon high-strength steels

Abstract

Exploring the micromechanical behavior of lath-martensitic quenching and tempering (Q&T), as well as quenching and partitioning (Q&P) steels presents a significant challenge due to their complex multi-phase constituents and hierarchical structures. This study conducts a comprehensive comparative analysis using medium-carbon Q&T and Q&P steels with identical chemical compositions. Atom probe tomography (APT) was used to investigate the distribution of chemical elements, while high-resolution digital image correlation (HR-DIC) provided insights into nanoscopic strain localization and partitioning. Both Q&T and Q&P steels exhibit significant strain localization at prior austenite grain boundaries (PAGBs) due to substantial carbon segregation. Strain localization in Q&T steel at PAGBs and packet boundaries strongly depends on preferred geometric orientations, with boundaries inclined 45 ° to the loading direction experiencing severe deformation. Conversely, in Q&P steel, PAGBs adjacent to large clusters of fine lath martensite, lacking a packet with a longitudinal direction parallel to boundaries and a feasible in-lath slip system, primarily undergo deformation. Carbon partitioning from martensite to retained austenite (RA), along with coexisting carbon and manganese segregation at phase interfaces, stabilizes the RA, resulting in a neighborhood-dependent deformation behavior of RA. The existence of RA not only absorbs carbon, maintaining low strength and high deformability, but also uniformly distributes and induces stable interfaces to hinder the formation of large packets with easily activated in-lath slip transmission.