1c:I[419806,["/_next/static/chunks/bb923814e1f4d2e9.js","/_next/static/chunks/dd3ee9f5b7716ca6.js","/_next/static/chunks/4204a0ae82542ca8.js","/_next/static/chunks/30036bedc5269936.js","/_next/static/chunks/6e1aa89a642f40be.js","/_next/static/chunks/cd5e572bc3e4eb92.js","/_next/static/chunks/8ffd0b71567920d8.js","/_next/static/chunks/67ea6dfd21f16c5f.js","/_next/static/chunks/24eb4379f68013fd.js","/_next/static/chunks/b8cd775ffdf935bd.js","/_next/static/chunks/983103cd9eb7b428.js","/_next/static/chunks/d4ac9dcf27f6ff52.js","/_next/static/chunks/294b9525248c8e5f.js"],"default"] 1d:T414,Efficient utilization of solar energy for clean water is an attractive, renewable, and environment friendly way to solve the long-standing water crisis. For this task, we prepared the long-range vertically aligned graphene sheets membrane (VA-GSM) as the highly efficient solar thermal converter for generation of clean water. The VA-GSM was prepared by the antifreeze-assisted freezing technique we developed, which possessed the run-through channels facilitating the water transport, high light absorption capacity for excellent photothermal transduction, and the extraordinary stability in rigorous conditions. As a result, VA-GSM has achieved average water evaporation rates of 1.62 and 6.25 kg m^-2 h^-1 under 1 and 4 sun illumination with a superb solar thermal conversion efficiency of up to 86.5% and 94.2%, respectively, better than that of most carbon materials reported previously, which can efficiently produce the clean water from seawater, common wastewater, and even concentrated acid and/or alkali solutions.1e:T4be,Thin-film composite membranes comprising a polyamide nanofilm separating layer on a support material are state of the art for desalination by reverse osmosis. Nanofilm thickness is thought to determine the rate of water transport through the membranes; although due to the fast and relatively uncontrolled interfacial polymerization reaction employed to form these nanofilms, they are typically crumpled and the separating layer is reported to be ≈50-200 nm thick. This crumpled structure has confounded exploration of the independent effects of thickness, permeation mechanism, and the support material. Herein, smooth sub-8 nm polyamide nanofilms are fabricated at a free aqueous-organic interface, exhibiting chemical homogeneity at both aqueous and organic facing surfaces. Transfer of these ultrathin nanofilms onto porous supports provides fast water transport through the resulting nanofilm composite membranes. Manipulating the intrinsic nanofilm thickness from ≈15 down to 8 nm reveals that water permeance increases proportionally with the thickness decrease, after which it increases nonlinearly to 2.7 L m^-2 h^-1 bar^-1 as the thickness is further reduced to ≈6 nm.1f:T519,Delivering sufficient water to the evaporation surface/interface is one of the most widely adopted strategies to overcome salt accumulation in solar-driven interfacial desalination. However, water transport and heat conduction loss are positively correlated, resulting in the trade-off between thermal localization and salt resistance. Herein, a 3D hydrogel evaporator with vertical radiant vessels is prepared to surmount the long-standing trade-off, thereby achieving high-rate and stable solar desalination of high-salinity. Experiments and numerical simulations reveal that the unique hierarchical structure, which consists of a large vertical vessel channel, radiant vessels, and porous vessel walls, facilitates strong self-salt-discharge and low longitudinal thermal conductivity. With the structure employed, a groundbreaking comprehensive performance, under one sun illumination, of evaporation rate as high as 3.53 kg m^-2 h^-1 , salinity of 20 wt%, and a continuous 8 h evaporation is achieved, which thought to be the best reported result from a salt-free system. This work showcases the preparation method of a novel hierarchical microstructure, and also provides pivotal insights into the design

	Year	Citations

References