Polymer · 2024 · 30 citations · 42 references
Natural SciencesMaterials EngineeringMaterials ScienceComputational Materials SciencePolymer EngineeringPolymer MaterialsComposite MaterialsFluid-flow In Porous MediaMaterial ModelingNanocompositesPolymer NanocompositesPorous MaterialsButadiene RubberCarbon-based FillersFillersFractal LatticesMultiphase Flow ModelingMultiphase Porous Media FlowPolymer Nanocomposite SimulationPorous Structures
The hydrogen diffusivities of acrylonitrile butadiene rubber (NBR) composites with different types and contents of carbon black (CB) fillers were investigated in the exposure pressure range of 0.5–10 MPa using a volumetric analysis system. These measured diffusivities exhibited distinct pressure-dependent behavior. The diffusivities of unfilled NBR and NBR composites containing medium-thermal CB filler decreased from 39.7 × 10 −11 m 2 /s to 9.4 × 10 −11 m 2 /s as the pressure increased. On the other hand, the pressure-dependent diffusivities of NBR composites containing high-abrasion furnace, fast-extrusion furnace and semireinforcing furnace CB fillers revealed left-biased unimodal shaped curves, with peak values ranging from 19.7 × 10 −11 m 2 /s to 5.6 × 10 −11 m 2 /s. To model this observed behavior, the diffusion resistance theory with a heterogeneous NBR–CB composite and a fractal porous structure for H 2 was introduced. The theoretical parallel diffusion resistance model was found to coexist independently as the surface, Knudsen, and bulk diffusion phases. This theoretical multiphase modeling was applied to the measured diffusivities, determining diffusion resistance parameters for each phase. The obtained individual parametric characteristics for each diffusion were interpreted by considering the CB filler content and volume fraction of the filler. As a result, the diffusivities calculated by multiphase diffusion modeling were in quite agreement with the measured diffusivities for all investigated specimens, where the determined squared correlation coefficient (R 2 ) by fitting process was in the range from 0.69 to 0.97. • Multiphase modeling of pressure-dependent H 2 diffusivity in NBR–CB composites. • Accurate evaluation for diffusivity with validated volumetric analysis system. • Fractal porous microstructure analysis of CB dispersed NBR. • Independently coexisting mechanisms of surface, Knudsen, and bulk diffusion.
42
Offshore Technology Conference
Kuala Lumpur · 2014 · 563 citations
On Gaseous Self-Diffusion in Long Capillary Tubes
William G. Pollard, R. D. Present · Physical Review · 1948 · 529 citations