Acta Materialia · 2024 · 64 citations · 98 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallic MaterialsMetallurgyAlloysDeformation MechanismsDislocation MechanicsMetalsPlastic DeformationStrain HardeningDislocation Cross-slipDislocation MotionPlastic Deformation BehaviorPlastic Deformation Of MetalsPrismatic EffectSlipSlip PlanesSlip Systems
The dominant active slip systems during plastic deformation of an extruded Mg-4.5Zn (wt.%) alloy with and without β 1 ′ precipitates were investigated by means of advanced electron back-scattered diffraction techniques and transmission electron microscopy . Planar slip traces were found in 92% of the grains with slip traces in the sample without precipitates and, among them, the primary active slip systems were basal <a> slip and pyramidal II <c + a> slip. However, non-planar slip traces were observed in 76% of the grains with slip traces in the sample with precipitates, and among them, prismatic <a> slip exhibited the highest activity, followed by pyramidal II <c + a> slip. The change in the dominant active slip systems with precipitation was attributed to the strong hardening induced by β 1 ′ precipitates on basal <a> slip. This favoured the cross-slip of basal <a> slip dislocations to prismatic plane and plastic deformation progressed by the glide of prismatic <a> slip dislocations parallel to the precipitates.
98
Texture Analysis with MTEX – Free and Open Source Software Toolbox
Florian Bachmann, Ralf Hielscher, Helmut Schaeben · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 2010 · 2.7K citations
Natural Sciences, Materials Engineering, Materials Science +17
Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
Matthew Barnett, Z. Keshavarz, A.G. Beer et al. · Acta Materialia · 2004 · 1.3K citations
Natural Sciences, Materials Engineering, Materials Science +16