Materials & Design · 2024 · 12 citations · 47 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysDislocation MechanicsMetalsMicrostructure EvolutionNickel-based SuperalloysPlastic DeformationCritical TemperatureDislocationsGrain BoundariesRecrystallizationRecrystallization BehaviorSingle-crystal SuperalloysStatic RecrystallizationSuperalloys
The static recrystallization (SRX) of the designed high γ′-fraction Ni-based single crystal superalloy (SX) AlloyX was investigated. The three-dimensional SRX threshold of AlloyX involves plastic strain – deformation temperature – heat treatment temperature established by isothermal deformation and heat treatment tests. The influence of different dislocation configurations obtained at different deformation temperatures on critical SRX temperature was analyzed. The high-density entangled dislocations were observed to gradually transition into low-angle grain boundaries at heat treatment temperature within the γ-channel, potentially serving as the primary driving force for the SRX of AlloyX. Compared with the lower γ′-fraction SX DD32, it is further determined that the preferential dissolution of the small-sized γ′ in the interdendritic region (IDR) caused by high Al is the important factor that induces the recrystallization to occur preferentially in the IDR of AlloyX rather than the dendrite region (DR).
47
The Hotter the Engine, the Better
John H. Perepezko · Science · 2009 · 1K citations
Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature
Roger C. Reed, Narumol Matan, David Cox et al. · Acta Materialia · 1999 · 337 citations