Journal of Materials Research and Technology · 2024 · 10 citations · 48 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysFracture ToughnessMetal MaterialsMetalsMicrostructure EvolutionWear-resistant MaterialsAlloying ElementsBulk MorphologyFerrous AlloysGrain Morphology EvolutionIron-based AlloysLamellar StructureToughnessWear-resistant Alloys
The continuously net-like morphology of borides accounts for the poor toughness of Fe–Cr–B wear-resistant alloys. To effectively modify the morphology of Fe 2 B, Mo element has been introduced in Fe–Cr–B alloys, and the microstructure evolution and mechanical properties have been systematically investigated. The results show Fe–Cr–B alloys are mainly composed of martensite, M 2 B, M 23 (B, C) 6 and lamellar M 3 B 2 after Mo addition. With the increase of Mo addition, the content of M 3 B 2 increases gradually while that of M 23 (B, C) 6 increases firstly and then decreases. Consequently, the net-like structure of M 2 B can be effectively broken to acquire the isolated bulk-like morphology, which is mainly attributed to the growth inhibition effect of lamellar structure M 3 B 2 . In addition, the hardness varies depending on the volume fraction of borides. However, the fracture toughness of Fe–Cr–B alloy can be dramatically improved by 34.3% with Mo addition increasing from 1 to 4%. Grain morphology modification of M 2 B plays the predominant role in the toughness improvement because the crack propagation path can be blocked. Furthermore, the lamellar M 3 B 2 structure can effectively hinder the cracking propagation so as to improve the alloy's fracture toughness. Mo addition has been proved to be an effective way to modify the grain morphology of M 2 B hard phase.
48
The wear of metals by hard abrasives
Rex Richardson · Wear · 1967 · 294 citations
Natural Sciences, Materials Engineering, Materials Science +12