Characterization of 3D printable Polyethylene Terephthalate Glycol composite filament reinforced with agricultural waste derived from pineapple plant

Jitendra Kumar, Vishal Mishra, Avinash Kumar, Sushant Negi

Journal of Reinforced Plastics and Composites · 2024 · 10 citations · 31 references

Concepts

Abstract

The aim of the current research is to develop a 3D printable PETG composite filament reinforced with pineapple fiber particulate (PALF-P). These filaments were produced using an extrusion technique, incorporating varying weight percentages (1.5%, 2.5%, 5%, and 7.5%) of PALF particles treated with a 5% NaOH chemical solution. Analytical techniques like Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) evaluated the impact of this treatment. A comprehensive study of the resulting composite filaments’ mechanical and physical attributes revealed improved cohesion between the PETG matrix and PALF particles, enhancing the overall properties. Specifically, the incorporation of 5 wt % PALF particles showed the highest ultimate tensile strength (53.54 ± 2.7 MPa), Young’s modulus (1443 ± 72.22 MPa), and load-bearing capacity (104.97 ± 5.25 N). In contrast, 2.5% of particles had the least noticeable effect on mechanical properties. Moreover, the developed sustainable composite filament showed significant promise in advancing bio-composites through additive manufacturing, potentially contributing to sustainable manufacturing practices.

References

31