Journal of Colloid and Interface Science · 2024 · 23 citations · 49 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemistryEnergy MaterialsMaterials ChemistryBattery MaterialsCathode MaterialsElectrochemical CellsElectrochemical Energy StorageElectrode MaterialsElectrode-electrolyte InterfacesCathode Active MaterialsCycling StabilityElectrochemical CharacterizationElectrode - Electrolyte InterphasesElectrode CoatingsSodium-ion BatteriesSodium-ion Battery MaterialsSodium-ion Cathodes
P 2-Na 0.67 Mn 0.67 Ni 0.33 O 2 is a promising cathode material for sodium ion batteries (SIBs) due to its low cost, high theoretical capacity, and non-toxicity. However, it still suffers from unsatisfactory cycling stability mainly incurred by the Jahn-Teller effect of Mn 3+ and electrolyte decomposition on the electrode/electrolyte interface. Herein, the P 2-Na 0.67 Ni 0.33 Mn 0.67 O 2 @PPy (NNMO@PPy) composite applied as cathode materials for SIBs is obtained by introducing conductive polypyrrole (PPy) as coating layer on the P 2-Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) microspheres. Numerous physical characterization methods indicate that the PPy layer was uniformly coated on the surface of NNMO microspheres without change in phase structure and morphology. The PPy coating layer can alleviate Mn dissolution and effectively suppress the side reactions between the electrolyte and electrode during cycling. The optimal NNMO@PPy-9 with 9 wt% PPy delivers a high capacity of 127.4 mAh/g at the current density at 150 mA g −1 , an excellent cyclic stability with high capacity retention of 80.5 % after 300 cycles, and enhanced rate performance (169.3 mAh/g at 15 mA g −1 while 89.8 mAh/g at 600 mA g −1 ). Furthermore, hard carbon (−)//NNMO@PPy-9 (+) full cell delivers a high energy density of 305.1 Wh kg −1 and superior cycling stability with 88.2 % capacity retention after 150 cycles. In-situ X-ray diffraction experiment and electrochemical characterization verify the highly reversible structure evolution and robust P 2-type phase structure of NNMO@PPy-9 for fast and stable Na + diffusion. This effective strategy of using conductive PPy as a coating layer may provide a new insight to modify NNMO surface, improving the cycling stability and rate capability.
49
Benoît Mortemard de Boisse, Dany Carlier, Marie Guignard et al. · Inorganic Chemistry · 2014 · 263 citations
Natural Sciences, Materials Engineering, Materials Science +17
Stalling oxygen evolution in high-voltage cathodes by lanthurization
Mingzhi Cai, Yanhao Dong, Miao Xie et al. · Nature Energy · 2023 · 245 citations